TOP
                LD 200 RO Antiscalant And Dispersant For RO Membrane
                LD 200 RO Antiscalant And Dispersant For RO Membrane
                LD200 is a kind of liquid scale inhibitor / dispersant without phosphorus, which is used to control scale deposition in membrane separation system. Reduce the possibility of particles on the surface of the fouling film.
                Features

                Product property:

                LD200 is a kind of liquid scale inhibitor / dispersant without phosphorus, which is used to control scale deposition in membrane separation system. Reduce the possibility of particles on the surface of the

                fouling film. At the same time can effectively control the concentrated water side sulfate, calcium fluoride, metal oxide and other substances scaling, suitable for all major membranes.

                Product characteristics:

                1.The effective control of CaCO3, CSO4, BaSO4, SrSO4and FeO,SiO2scale up to 3.0.

                2.The product has excellent performance, green environmental protection, no phosphorus, high safety to reverse osmosis system.

                3.Dispersing blocking particles to keep the surface of reverse osmosis membrane clean.

                4.Suitable for the main reverse osmosis membranes such as Hyde energy membrane, Dow membrane, general fluid membrane, Toray membrane, Korea membrane and so on.

                5.The pH range of influent from 5 to 9 is still within the effective range.

                6.Can be added directly to the original solution or diluted.

                Specificafion:

                Items

                Index

                standard solution

                11 times

                Appearance

                Colorless to pale yellow transparent liquid

                Colorless to pale yellow transparent liquid

                Ph(1%water solution)

                2.5 ±1

                2.5 ±1

                Density(20 ℃)g / cm3

                1.08 ±0.05

                1.20 ±0.05

                Usage method:

                The dosing position of LD220 is usually before the precision filter, and the dosage of typical standard solution is 2 mg / L, depending on the water quality of customers and the operation of RO equipment.

                Matters need attention:

                1.RO osmotic water was used to dilute.

                2.The scale inhibitor solution is reformulated every 3-5 days.

                3.Check the daily storage container of the scale inhibitor before adding the solution again. If necessary, clean the storage container before adding it.

                4.A dilution ratio of up to 10 times is usually used. If a dilution ratio of more than 10 times is required, special attention should be paid to the state of the scale inhibitor storage container (degree of cleanliness) and reformulation of the solution every 1-3 days.

                Please consult the Ludong chem product representative for specific usage and dosage determination. The technical service engineer will recommend a suitable use plan for your use.

                Message
                Product name:
                Name:
                Tel:
                E-mail:
                Related Products
                • tel 1:
                  15589977574
                • tel 2:
                  0086 15589977574
                • whatsapp:
                  +8615589977574
                日韩免费高清视频,国产三级片免费观看,成年真人性生黄色视频,能直接看的毛片免费视频,无码粉嫩小泬无套在线观看